Maybe (under certain strict conditions). But do you want to? And, why?
Before embarking on a potentially arduous and costly journey toward reusing your sterilizing filters, we strongly recommend you ask yourself the questions below and consider alternatives that may save you time and money.
In our 22 years of manufacturing filters and helping process teams configure their best systems, we know the #1 reason for pursuing the reuse of sterilizing filters is to reduce the cost of filtration. After all, sterilizing the final filters is the more expensive filter in the process. So, let’s look at other cost factors associated with filter reuse before you decide if it’s the right strategy for you.
If your current filter has a lot of filtration capacity left over after processing a batch, perhaps you could reduce filtration costs by using a smaller filter. The potential negatives of this approach are longer processing times and/or higher pressure drops across the filter. In the extreme, a higher-pressure drop may require some level of re-validation to ensure proper retention at the different process conditions.
A larger batch size using the same filter will spread the filtration cost over more of your product, resulting in lower cost-per-volume filtering. If there are plans to scale up shortly, your resources might be better spent accelerating those efforts, rather than spending them developing a reuse strategy that might become obsolete.
This will depend on what you are filtering, and where in the process the filter is used. In a pharmaceutical process, the further downstream a sterilizing filter is placed, the more critical it is to ensure proper retention. In a typical drug manufacturing operation, sterilizing filters could be used for:
Water purification and ingredient filtration would present the opportunity for filter reuse with minimal validation requirements unless it is critical to maintaining batch integrity. For example - if an ingredient is supplied from a bulk container, it is used over multiple batches of a formulation. However, if the ingredient is used in discrete quantities where it is important to maintain lot traceability, then there would be more stringent validation requirements.
Reusing sterilizing filters for the other components, ingredients, and final product will require extensive risk assessment and validation efforts. FDA guidance on sterile filtration strongly suggests sterilizing filters be discarded after each lot, but allows for reuse with proper justification and validation.
Once you establish filter size and batch size, you should calculate the filtration cost (per batch, per volume, etc.) of using your filter(s) once. Then, determine how many times you might reasonably be able to reuse the filters, and estimate the operating cost (labor, materials, etc.) required to process the filters for reuse (cleaning, sterilizing, drying, packaging, storage, etc.). This will allow you to determine the potential cost savings by reusing your filters. Next, calculate how much you can spend on validating filter reuse to get a reasonable return on that investment.
FDA Guidance:
Sterilizing filters should be routinely discarded after processing of a single lot. However, in those instances when repeated use can be justified, the sterile filter validation should incorporate the maximum number of lots to be processed.
Guidance for Industry - Sterile Drug Products Produced by Aseptic Processing — Current Good Manufacturing Practice, Section IX - B. Filtration Efficacy, page 28
There will be many steps required to justify and validate the reuse of your sterilizing filters, some of which may be difficult to accurately predict the actual cost. They are:
All will involve input from Operations, Engineering, Quality, Regulatory Affairs, etc. How many hours of meetings this may consume is open-ended, depending on the risks and mitigation actions identified.
Risk Analysis Recommendations
At a minimum, the risk assessment needs to consider:
Maintaining batch integrity and traceability
Determining the maximum number of uses for the filter
Assessing Endotoxin potential
Identifying overall risk and impact on a specific batch
Understanding if filter reuse will require additional batch testing
Each step of the reuse procedure will require Process Development and SOP generation. Here again, this will require resources from multiple groups (Operations, Engineering, and Quality at a minimum), and it may be difficult to accurately predict the level of effort required.
After reuse procedures and SOPs have been established, each step will require some level of validation. With proper justification, it may be possible to combine some of the steps above.
The cost of the product consumed during protocol execution must also be considered.
In addition to the cost of Process Development and SOPs, there may be new equipment required to implement filter reuse. These would need to be installed before Validation execution.
Now that you have a cost estimate to compare against the potential savings of reusing sterilizing filters, you can consider the following:
In performing the above analysis, it is important to consider both the base estimated cost, and establish a range (in case of unforeseen overruns) to ensure it makes sense to proceed.
Each step of the reuse procedure will require Process Development and SOP generation. Here again, this will require resources from multiple groups (Operations, Engineering and Quality at a minimum) and it may be difficult to accurately predict the level of effort required.
We have discussed that while it may be possible to reuse your sterilizing filters, it will most likely be an expensive and resource-consuming process to arrive at a fully validated and documented process that will satisfy the appropriate regulatory bodies. Alternatives are available that may not save quite as much money as filter reuse, but would be far easier and less costly to implement with a better return on investment.
Whichever way you choose to go, Critical Process Filtration can help. We offer over twenty years of experience as a mid-size manufacturer of process filters. We have an experienced Applications and Process Support staff that will perform any testing required to identify the right sterilizing filters for your process and can assist in risk assessment, process development, and validation as required.
We'll make sure you get a robust, one-of-a-kind solution for your process with the best ROI.
(603) 880-4420